9 Best Cut Resistant Gloves for Women (November 2026)
The best cut resistant gloves for women include the DEX FIT Level 5 Cut Resistant Gloves for a snug, dexterous fit, the NoCry Cut Resistant Work Gloves for Women for reinforced finger protection, and the Schwer ProGuard High Level Cut Resistant Work for maximum ANSI A9 protection.
On this page (8 sections)
- Best cut resistant gloves for women, ranked by fit and protection
- How we compared these gloves for women
- What size should women buy in cut resistant gloves?
- Which ANSI level do women need for kitchen prep?
- Do you need food safe or waterproof gloves?
- How should you care for cut resistant gloves?
- Which pair should you buy first?
- Verdict: best cut resistant gloves for women
The best cut resistant gloves for women for most home kitchens are the DEX FIT Level 5 in the right size, because the thin knit and nitrile grip help you hold food steady on a mandoline or cutting board.
Our score weighs specs, features and buyer feedback against what you're shopping for.
Fit matters more than a higher ANSI number for daily prep.
A glove that is too large can bunch at the fingers and reduce control, no matter how strong the yarn is.
We compared nine pairs by ANSI level, material, coating, sizing and food use.
If you want background first, start with what are cut resistant gloves and how do cut resistant gloves work.
Women often need a smaller or more tapered cut than a standard work glove, and that changes how the glove handles on a knife.
A pair that drags at the wrist can shift when you push a potato through a mandoline, and a loose thumb can catch on a peeler.
That is why sizing range, stretch and knit weight sit high in our ranking, ahead of a headline protection number alone.
Our picks at a glance
-
1
Best for a snug, dexterous fitDEX FIT Level 5 Cut Resistant Gloves
9.7/10 our score
See it on Amazon -
2
Best for reinforced finger protectionNoCry Cut Resistant Work Gloves for Women
9.6/10 our score
See it on Amazon -
3
Best for maximum ANSI A9 protectionSchwer ProGuard High Level Cut Resistant Work
9.5/10 our score
See it on Amazon
- 4
Check itDowellife ANSI A9 Cut Resistant Glove Food
Best for butcher and oyster work - 5
Check itSchwer 2 Pairs A7 Cut Resistant Work
Best for value in a two-pair pack - 6
Check itBeaverCraft Wood Carving Gloves CRG
Best for whittling and kitchen crossover - 7
Check itNoCry Cut Resistant Work Gloves For Men
Best for wet, slippery prep - 8
Check itKLEIN TOOLS A2 Cut-Resistant Work Gloves
Best for light everyday tasks - 9
Check itLOCCEF Level 5/A4 Cut Resistant Work Gloves
Best for budget friendly touchscreen use
Best cut resistant gloves for women, ranked by fit and protection
The top picks balance dexterity, grip and protection for smaller hands.
Higher ANSI options follow for women who do butchering or heavy mandoline work.
Cut resistant gloves ansi levels explain the numbers behind these picks in more detail.
Read that guide if you are choosing between A2, A5, A7 and A9.
DEX FIT Level 5 Cut Resistant Gloves: Best for a snug, dexterous fit
- Level 5 cut resistant
- 13-gauge thin and lightweight knit
- Foam nitrile coating for grip
- Touchscreen compatible
A thin, second-skin style glove for women who slice and peel often and want control without bulk.
Pros
- Thin 13-gauge knit for dexterity
- Nitrile grip on wet or greasy foods
- Machine washable
Cons
- Level 5, not the highest ANSI level here
- Fitted cut needs careful sizing
DEX FIT suits women who prep daily and want a glove that feels close to bare skin.
The 13-gauge knit is thin and lightweight, so peeling, slicing and grating feel more controlled than with a bulky work glove.
Its mix is 60% HPPE, 10% fiberglass and 30% nylon and spandex, at only 0.5 millimeters thin in the listing.
That blend gives high stretch and a fitted feel, which helps when you need to flex your fingers around a melon or a mandoline guard.
The foam nitrile coating adds grip on wet or greasy surfaces, and the glove is listed as waterproof for those tasks.
DEX FIT says the water-based coating passed an FDA food contact test, which makes it a sensible choice for kitchen hands.
Five sizes from extra small to extra large help smaller hands find a closer match than a one-size pair.
Trade-off: it is ANSI A5 with abrasion level 4, so it sits below the A7 and A9 pairs here.
Choose it for control and comfort, and size carefully so the fingertips sit flat.
NoCry Cut Resistant Work Gloves for Women: Best for reinforced finger protection
- Level 5 cut resistance
- Stainless steel in three fingers
- Food safe materials
- Ambidextrous pair
A food safe pair with extra steel thread where cuts happen most, made for everyday prep.
Pros
- Reinforced three fingers
- Food safe for kitchen use
- Five sizes for a closer fit
Cons
- Reinforcement adds weight in the fingers
- Not waterproof
NoCry suits women who nick the same fingers again and again during chopping and peeling.
The maker adds stainless steel thread to three fingers, the spots most likely to meet a blade during everyday prep.
The rest of the glove uses polyethylene, glass fibre and spandex, keeping the pair lightweight and elastic at 2.88 ounces.
That construction lets you hold a knife or a peeler without a stiff feel, while the steel adds toughness where you need it most.
NoCry lists EN388 Level 5 cut resistance and describes the glove as more than four times tougher than leather.
The pair is food safe and free from BPA, chlorine, latex, lead and nitrile in the materials list, which matters for direct kitchen contact.
It is ambidextrous and comes in five sizes, which helps smaller hands find a closer match by palm and finger measurement.
Trade-off: the steel reinforcement is not waterproof and adds a little weight up front.
For wet fish or heavy washing up, a dipped waterproof pair may suit you better.
Schwer ProGuard High Level Cut Resistant Work: Best for maximum ANSI A9 protection
- ANSI A9 cut level
- HPPE, polyester, spandex and metal wire
- Sandy nitrile coating
- Touchscreen compatible
A high protection option for women who want a large safety margin during heavy prep.
Pros
- ANSI A9 protection
- Reinforced thumb area
- Grip in wet and greasy conditions
Cons
- One size may not fit smaller hands well
- Work glove styling is less kitchen focused
Schwer ProGuard suits women who want the highest ANSI level in this list for heavy prep.
It is rated ANSI A9, which gives a larger safety margin for extreme cutting hazards than Level 5 or A5 pairs.
The yarn mixes HPPE, polyester, spandex and metal wire in a 13-gauge knit that stays lightweight.
Schwer says the glove stays breathable and cool during long wear, which matters for batch prep and factory style tasks.
A sandy nitrile coating helps grip in wet and greasy conditions, so melons, squash and oily skins feel more secure.
The thumb crotch is reinforced, a useful detail when you grip a knife handle or a mandoline knob for long stretches.
Touchscreen compatibility lets you handle a phone or tablet without removing the glove during work.
Trade-off: fit is listed as one size fits all.
That can be a problem for smaller hands, so measure your palm and check the sizing notes before you order.
Dowellife ANSI A9 Cut Resistant Glove Food: Best for butcher and oyster work
- ANSI A9 cut level
- 316 stainless steel and HPPE
- Food grade materials
- Single glove with nylon inner glove
A steel mesh style single glove for filleting, shucking and mandoline work with direct food contact.
Pros
- Food grade steel and HPPE
- Adjustable wrist strap
- Hanging loop for drying
Cons
- Single glove, not a pair
- Steel mesh feels different from a knit glove
Dowellife suits home butchers and seafood fans who need steel level protection.
It is an ANSI A9 glove made with 316 stainless steel wire and HPPE, aimed at filleting, oyster shucking and mandoline slicing.
The materials are food grade for direct food contact, and the medium weight knit has no stretch in the listing.
A white nylon inner glove is included, and the adjustable yellow wrist strap helps the single glove stay put on either hand.
The palm material is stainless steel and uncoated, which gives a different feel from a nitrile dipped knit glove.
You can wash it by hand, by machine or in a dishwasher, according to the brand, and a hanging loop helps it dry.
Touchscreen use is designed for tapping and swiping on a phone, not for precision typing, which suits recipe or order checks.
Trade-off: this is one glove, not a pair, and steel mesh feels cooler and firmer than a knit glove.
A vegetable slicer guide can help you pair it with the right mandoline for your prep style.
Schwer 2 Pairs A7 Cut Resistant Work: Best for value in a two-pair pack
- ANSI A7 cut level
- HPPE and metal wire
- Sandy nitrile coating
- 2 pairs included
Two washable pairs for women who prep often and want a clean pair ready while one is in the wash.
Pros
- Two pairs in the pack
- ANSI A7 protection
- Touchscreen fingertips
Cons
- XL size may suit larger hands best
- Smaller hands may need another size
Schwer 2 Pairs suits women who prep often and want a spare pair ready to wear.
The pack includes two pairs rated ANSI A7, a strong middle level for medium to heavy cut hazards.
HPPE and metal wire form the knit, with a sandy nitrile coating for grip in wet and greasy conditions.
The coating stays effective on melons, squash and oily skins, which helps when produce is freshly washed.
The 13-gauge knit keeps the gloves light at 0.22 kilograms for the pack, and soft enough for long sessions.
Touchscreen fingertips on all ten fingers let you check a recipe or answer a call without taking them off.
The pair is washable and reusable, so a second set makes rotation easy after food prep or garden work.
Trade-off: this listing is XL and regular fit.
That may be too large for many women, so look for a smaller size in the same line if your palm is narrow.
BeaverCraft Wood Carving Gloves CRG: Best for whittling and kitchen crossover
- Level 5 dexterity
- High-density polyethylene, polyester and spandex
- 100% food safe
- Sizes S, M and L
A lightweight crossover glove for food prep, whittling and garden tasks in three sizes.
Pros
- Food safe for kitchen use
- Three sizes including S
- Machine washable
Cons
- Thorns and prickles remain a risk in the garden
- Less grip coating than dipped pairs
BeaverCraft suits women who move between kitchen, craft and garden in one week.
It offers Level 5 dexterity in sizes S, M and L, with a light blend of high-density polyethylene, polyester and spandex.
The brand describes the gloves as 100% food safe for slicing meat, dicing vegetables and grating cheese.
That makes them a practical crossover for a home that also whittles, carves wood or prunes plants.
Airflow from the knit helps hands stay cooler during longer sessions than a full dipped coating.
The gloves are machine washable for easy cleaning after food or garden work, which matters when you switch tasks quickly.
Sizes S, M and L give smaller hands a real starting point, unlike one-size options that can swallow the fingers.
Trade-off: there is no heavy dipped grip here, and the brand warns that thorns can still pose a risk.
For slippery mandoline work, a nitrile dipped pair may grip better.
NoCry Cut Resistant Work Gloves For Men: Best for wet, slippery prep
- Level 5 cut resistant
- Nitrile waterproof palms
- Reinforced thumb and forefinger area
- Touchscreen tips
A dipped pair with waterproof palms for washing produce, fish and other wet prep.
Pros
- Waterproof palms
- Strong nitrile grip
- Five sizes available
Cons
- Palm coating can feel warmer
- Back of hand is not waterproof
NoCry waterproof palms suit women who wash produce, clean fish or handle wet ingredients often.
The nitrile coating gives a strong non-slip grip while the palms resist water during wet prep.
It is Level 5 cut resistant, with a reinforced area between thumb and forefinger for lasting durability.
That spot wears fast when you hold a knife or a peeler in the same grip for minutes at a time.
The knit uses polyethylene, glass fibre, copper fibre, nylon, polyester and spandex, and stays thin and flexible.
The fabric is lightweight at 3.52 ounces and breathable, so dexterity stays high for detailed cutting and peeling.
Five sizes and a regular fit help you match the glove to your palm instead of guessing from a general small label.
Touchscreen tips let you swipe and type without removing the glove, which is handy during meal prep.
Trade-off: only the palms are waterproof, not the whole glove.
If your hands sit in water for long periods, expect the backs to wet through.
KLEIN TOOLS A2 Cut-Resistant Work Gloves: Best for light everyday tasks
- ANSI A2 cut level
- HPPE knit with microfoam nitrile dip
- Touchscreen capable fingertips
- 2-pair pack
A light, dexterous pair for peeling, sorting and light prep where abrasion matters more than deep cuts.
Pros
- Very flexible for detailed work
- Grip in dry, oily and wet conditions
- Two pairs included
Cons
- ANSI A2 offers only moderate cut protection
- Not the pick for sharp mandoline work
Klein Tools suits women who need light protection for everyday tasks and sorting.
It is ANSI A2, which the brand describes as moderate protection against cuts and abrasions.
The HPPE knit is dipped in microfoam nitrile for grip in dry, oily and wet conditions on the jobsite.
The knit conforms to your hand, which helps with sorting, peeling and light trimming without a stiff feel.
Touchscreen fingertips and a smooth knit cuff add comfort for all-day wear around the wrist.
The pack includes two pairs, so one can be washed while the other is in use during a busy week.
That rotation matters for kitchen gloves, since a damp pair is less safe and less comfortable to wear.
Trade-off: A2 is the lowest level here, well below A5, A7 and A9 picks.
Skip it for mandoline, filleting or butchering, and choose A5 or higher for those jobs.
LOCCEF Level 5/A4 Cut Resistant Work Gloves: Best for budget friendly touchscreen use
- Level 5/A4 cut resistant
- Micro-foam nitrile coating
- Touchscreen compatible
- Five sizes
A snug, anti-slip pair for cooking and light workshop tasks at a budget friendly position.
Pros
- Five sizes for a tailored fit
- Touchscreen use without removal
- Reinforced thumb and forefinger area
Cons
- Lower ANSI level than A7 and A9 picks
- Nitrile coating needs regular washing to keep grip
LOCCEF suits budget conscious buyers who want touchscreen use and a snug fit.
It is Level 5/A4 cut resistant with a micro-foam nitrile coating for anti-slip grip.
The reinforced thumb and forefinger area helps the pair last through repeated kitchen and garden use.
Five sizes make it easier to match a smaller hand than a one-size option, which is a key point for women.
Touchscreen tips let you use a phone or tablet without removing the gloves during cooking or workshop tasks.
The snug cut helps with cooking, peeling and light workshop tasks where control matters more than heavy protection.
That focus makes it a practical starter pair if you are new to cut gloves and want to test the habit first.
Trade-off: A4 sits below A5, A7 and A9 picks for sharp work with knives or mandolines.
Wash the coating regularly, since food residue can reduce grip over time.
How we compared these gloves for women
We compared ANSI level, yarn type, coating, sizing range and food safe wording across all nine pairs.
We also checked which pairs suit mandoline work, knife work, wet prep and butchering.
We did not test these gloves in person.
Scores reflect specs, features and buyer feedback against the needs of women shopping for kitchen prep.
The DEX FIT and NoCry pairs score high for thin knits and sizing choices that suit smaller hands.
The Schwer A9, Dowellife A9 and Schwer A7 pairs score high for protection margin, even though their fit options are narrower for women.
Klein A2 and LOCCEF A4 score lower for cut margin, which pulled them down for mandoline and butchering use.
What the specs tell you in daily use
ANSI level tells you the cut load the glove is rated to resist in testing.
A5, A7 and A9 are not interchangeable, and a higher number adds margin when a blade slips.
Material tells you how that margin is built, from HPPE and spandex blends to metal wire or stainless steel.
Coating tells you how the glove grips, since sandy nitrile, foam nitrile and microfoam nitrile all handle wet food differently.
Sizing range tells you whether a smaller hand can get a flat fingertip fit, which affects control more than most people expect.
Food safe wording tells you whether the pair is meant for direct food contact, which separates kitchen pairs from workshop pairs.
| Product | Best for | ANSI level | Material | Fit | Our score |
|---|---|---|---|---|---|
| DEX FIT Level 5 Cut Resistant Gloves | a snug, dexterous fit | A5 | 60% HPPE, 10% fiberglass, 30% nylon and spandex | Fitted, high stretch | 9.7 |
| NoCry Cut Resistant Work Gloves for Women | reinforced finger protection | Level 5 | Polyethylene, glass fibre, spandex, stainless steel | Regular, medium stretch | 9.6 |
| Schwer ProGuard High Level Cut Resistant Work | maximum ANSI A9 protection | A9 | HPPE, polyester, spandex, metal wire | One size fits all | 9.5 |
| Dowellife ANSI A9 Cut Resistant Glove Food | butcher and oyster work | A9 | Stainless steel, HPPE | Ambidextrous, medium | 9.3 |
| Schwer 2 Pairs A7 Cut Resistant Work | value in a two-pair pack | A7 | HPPE, metal wire, nitrile | Regular, XL | 9.1 |
| BeaverCraft Wood Carving Gloves CRG | whittling and kitchen crossover | Level 5 | High-density polyethylene, polyester, spandex | S, M and L | 8.8 |
| NoCry Cut Resistant Work Gloves For Men | wet, slippery prep | Level 5 | Polyethylene, glass fibre, copper fibre, nylon, polyester, spandex | Regular, five sizes | 8.5 |
| KLEIN TOOLS A2 Cut-Resistant Work Gloves | light everyday tasks | A2 | HPPE, nitrile | Snug, conforming | 8.5 |
| LOCCEF Level 5/A4 Cut Resistant Work Gloves | budget friendly touchscreen use | A4 / Level 5 | Nitrile coated knit | Snug fit, five sizes | 8.3 |
What size should women buy in cut resistant gloves?
Buy by measurement, not by label.
Measure palm circumference and middle finger length, then match the size chart for the pair you want.
A snug fit with flat fingertips gives better control.
Loose fabric at the fingers can catch on a mandoline or fold under a knife handle.
DEX FIT offers five sizes with a fitted, high stretch cut, and NoCry offers five sizes in a regular fit.
BeaverCraft offers S, M and L, which gives smaller hands a clearer start than a one-size pair.
Schwer ProGuard is one size fits all, and the Schwer two-pair listing here is XL, so both need care for narrow palms.
Klein Tools uses a snug, conforming knit, and LOCCEF offers five sizes for a tailored fit.
How to measure for a closer fit
Wrap a soft tape around your palm at the widest point.
Note the number, then compare it with each brand chart before you order.
If you are between sizes, size down for knife work.
A slightly tight glove usually controls better than a loose one.
Check that the thumb sits without pulling, and that the fingertip ends right at your nail.
Excess length at the index finger is the first sign the size is too large.
When a larger size works better
Choose a larger size if you wear the glove over a liner or need room for swelling.
Women with wider palms may also prefer a roomier cut for long wear.
A larger size can also help if you want to pull the glove on and off quickly between tasks.
For larger hands, our guide to best cut resistant gloves large lists pairs with more room.
For mid-size hands, best cut resistant gloves medium can narrow the search.
Which ANSI level do women need for kitchen prep?
Most home prep needs Level 5 or A4 to A5.
That covers slicing vegetables, peeling, grating and boning chicken with a sharp knife.
A7 adds margin for heavy mandoline work and tougher skins.
A9 suits butchering, filleting and oyster shucking where a slip could be serious.
DEX FIT is ANSI A5, NoCry is Level 5, and LOCCEF is Level 5/A4 for that everyday band.
Schwer two-pair is ANSI A7, which sits a step above for medium to heavy hazards.
Schwer ProGuard and Dowellife are ANSI A9 for the highest margin in this list.
Klein Tools is ANSI A2, which the brand frames as moderate protection for light work.
A2 and A4 for light tasks
A2 and A4 pairs work for sorting, peeling soft produce and light garden tasks.
They keep dexterity high and cost less in most ranges.
Do not rely on A2 for a mandoline or a boning knife.
The margin is too small for those tools.
LOCCEF A4 is a step up from Klein A2, but it still sits below A5 for sharp kitchen work.
Use those pairs where abrasion and grip matter more than deep cut margin.
A5 to A9 for sharper tools
A5 is the sweet spot for most women in a home kitchen.
A7 and A9 make sense if you break down meat, fillet fish or use a mandoline without a guard.
Higher levels often use metal wire or steel, which can feel firmer.
Balance that protection against comfort for long prep sessions.
Dowellife uses 316 stainless steel wire with HPPE for its A9 rating.
Schwer ProGuard uses HPPE, polyester, spandex and metal wire for its A9 rating.
Both approaches trade some softness for a larger safety margin on sharp tools.
Do you need food safe or waterproof gloves?
Food safe matters when the glove touches food directly.
Look for food safe or food grade wording and materials made for kitchen contact.
Waterproof palms help with washing, fish and wet produce.
They do not make the whole glove waterproof, so check what is coated.
DEX FIT lists an FDA food contact test for its nitrile coating.
NoCry, Dowellife and BeaverCraft describe food safe construction for kitchen use.
NoCry waterproof palms and DEX FIT waterproof listing help with wet tasks, while most knit pairs are not fully waterproof.
Food safe pairs for direct contact
NoCry, Dowellife and BeaverCraft describe food safe construction for kitchen use.
Wash them before first use and after each session.
Work gloves without food safe wording may be fine for wood or garden tasks.
Keep those pairs out of direct food contact.
Check the free-from list where it is given, such as BPA free and latex free on the NoCry reinforced pair.
That detail helps if you have sensitivities and cook for others at home.
Waterproof palms for wet prep
Dipped pairs with nitrile palms, such as the NoCry waterproof option, grip better on wet food.
Our roundup of best cut resistant gloves waterproof covers more wet-work options.
If you handle fish or wash large amounts of produce, a dipped pair is usually easier to keep clean.
Air dry it fully after each use.
Palm-only waterproofing still leaves the back of the hand exposed, so plan for that limit.
For long washing up, a dipped pair will wet through on the back even if the palm stays dry.
How should you care for cut resistant gloves?
Wash most knit pairs on a cool cycle with mild detergent.
Air dry them to protect coatings and elastic.
Steel mesh pairs can be hand washed, machine washed or dishwasher cleaned, depending on the brand.
Let them dry before storing to prevent odour.
NoCry reinforced pairs specify a cool cycle, mild detergent and drip dry.
DEX FIT lists machine washable construction in its title and features.
Dowellife lists hand wash, machine wash and dishwasher cleaning for its steel mesh glove.
Washing and drying basics
Shake off food residue before washing.
Avoid bleach and fabric softener, which can weaken coatings and yarns.
Check the glove for worn spots before each use.
Retire a pair with holes, frayed fingertips or a cracked coating.
Heat from a dryer can damage nitrile coatings and spandex stretch over time.
Air drying is slower, but it keeps grip and fit closer to new for longer.
When to replace a pair
Replace gloves when grip fades or the knit thins at the fingers.
A worn glove can snag and reduce control at the exact moment you need it.
Keep a second pair in rotation if you prep daily.
Washing and drying take time, and a clean pair is safer than a damp one.
Two-pair packs from Schwer and Klein Tools make that rotation easier to manage.
Reinforced thumb and forefinger areas on several pairs delay wear, but they do not stop it forever.
Inspect the palm coating and the fingertip yarns every few weeks if you cook often.
Which pair should you buy first?
Pick DEX FIT for a snug, dexterous everyday glove.
Pick NoCry reinforced if finger cuts worry you most.
Pick Schwer ProGuard or Dowellife if you want ANSI A9 for butchering or shucking.
Pick Klein A2 only for light tasks where dexterity matters more than cut margin.
For thin, flexible options, see best cut resistant gloves thin.
That guide focuses on close fitting pairs for detailed work.
If you mostly peel and slice soft produce, a thin A5 pair in the right size will feel best day to day.
If you fillet fish weekly or shuck oysters, step up to A7 or A9 and accept a firmer feel.
If your hands are small, start with a five-size range or an S option before you try a one-size pair.
Verdict: best cut resistant gloves for women
The best cut resistant gloves for women combine a close fit, reliable grip and the right ANSI level for your sharpest tool.
DEX FIT wins for everyday control, NoCry wins for reinforced fingers, and A9 pairs win for heavy butchering.
Measure your palm, choose by the tool you use most, and replace worn pairs promptly.
That simple rule will keep your prep safer than buying the highest level in the wrong size.
Our top 3 picks at a glance
-
1
Best for a snug, dexterous fitDEX FIT Level 5 Cut Resistant Gloves
9.7/10 our score
See it on Amazon -
2
Best for reinforced finger protectionNoCry Cut Resistant Work Gloves for Women
9.6/10 our score
See it on Amazon -
3
Best for maximum ANSI A9 protectionSchwer ProGuard High Level Cut Resistant Work
9.5/10 our score
See it on Amazon
Frequently asked questions
What size cut resistant gloves should women buy?
Buy by palm circumference and finger length, not by a youth or small label alone. A snug fit with no loose fabric at the fingertips gives better control on a mandoline or knife.
Try the pair at home first and exchange it if you can pinch excess fabric at the wrist.
Are cut resistant gloves safe for food prep?
Some pairs are made with food safe materials for direct food contact, and others are work gloves that should stay out of the kitchen. Check the materials and food safe wording for the exact pair you choose.
Wash gloves before first use and after each use, then let them dry fully before storing them.
What ANSI level do I need for kitchen work?
Level 5 or A4 to A5 covers most home slicing, peeling and grating tasks. Higher levels such as A7 or A9 add margin for butchering, filleting and oyster shucking.
Match the level to the sharpest tool you use most often, and size the glove so it does not snag.
Can I wash cut resistant gloves in the machine?
Many knit pairs here are machine washable on a cool cycle with mild detergent. Steel mesh and coated pairs may need gentler care, so follow the care notes for your pair.
Air dry after washing, since heat can weaken coatings and elastic over time.
About this guide: Our look at cut resistant gloves for women draws on maker specs, materials and what owners report. See how we research.



