Buying guide

How to Choose Canning Jars with Glass Lids

Updated on · By the Food Dehydrator Expert team

Canning jars with glass lids are chosen by method first, then by mouth size and closure style. Use glass lids with clamps for water bath and pressure canning when the jar maker approves that closure, use standard metal lids for most home canning, and use plastic or silicone tops only for storage and fermentation.

On this page (14 sections)
  1. What are canning jars with glass lids and how do closures differ?
  2. How do you choose jars by preservation method?
  3. Which mouth size should you buy for canning jars with glass lids?
  4. How do glass clamp lids work and when do they suit canning?
  5. What should you check on jar glass before you reuse or buy?
  6. Are metal lids still better than glass lids for home canning?
  7. When do plastic tops suit jar storage better than glass lids?
  8. When do silicone fermenting lids suit jars better than glass lids?
  9. Which standard lids suit regular mouth jars for canning?
  10. How do you compare one piece lids, glass lids and two piece lids?
  11. How do you check glass lid compatibility with Ball jars?
  12. How should you clean, store and care for glass lids and jars?
  13. What should you avoid when you buy canning jars with glass lids?
  14. Which glass lid jar setup should you choose for your kitchen?

Canning jars with glass lids work best when you match the jar, lid and method before you buy. Start with the food and the preservation method, then choose the mouth size and closure that the maker approves for that use.

Glass lids vary widely in how they seal. Some use a rubber gasket and a clamp, some use a screw band, and some are simple storage covers with no canning seal.

The right choice depends on whether you plan to can, ferment, store dry food or keep liquids in the refrigerator.

This guide explains closure styles, jar suitability and the trade offs between glass, metal, plastic and silicone tops. It also shows where three specific products fit and where they do not fit.

What are canning jars with glass lids and how do closures differ?

Canning jars with glass lids use different seal systems, so lid style matters as much as the jar. Clamp, screw and storage lids can look alike but behave differently under heat or pressure.

Glass clamp lids press a rubber gasket against the rim with a metal clamp. The clamp must match the mouth, and the gasket must sit flat and clean.

Screw top glass lids use threads and often a sealing ring. They may suit storage, but they are not approved for canning unless the maker states that use.

Metal lids with screw bands remain the most common home canning closure. Plastic and silicone tops are for storage or fermentation, not substitutes for canning lids.

How do you choose jars by preservation method?

Choose the jar by method first, because water bath, pressure canning, fermenting and dry storage place different demands on glass and closures. A jar for pickles in a water bath may not suit low acid vegetables in a pressure canner.

Water bath suits high acid foods such as jams, jellies, pickles, fruits and sauces. Use glass jars only when the maker allows water bath processing, and use standard metal lids for most tested recipes.

Pressure canning suits low acid foods such as vegetables, meats and soups. It needs a jar and closure approved for pressure processing.

Check the pressure canner pot guide before you assume a glass lid will work.

Fermentation uses salt and gas release rather than heat. A venting silicone top can suit it, while a clamp glass lid may need burping or an airlock.

Dry and refrigerator storage are more flexible, but they do not make a jar suitable for canning.

Which mouth size should you buy for canning jars with glass lids?

Mouth size controls packing, cleaning and lid choice. Regular and wide mouth jars can hold the same foods, but the opening changes daily packing and washing.

Regular mouth jars have a narrower opening and smaller lid. They suit jams, jellies, sauces and spooned foods, and standard lids are widely stocked.

Wide mouth jars have a wider opening and larger lid. They suit pickles, fermented vegetables, large fruit pieces and hand packed foods, and they fit accessories such as fermenting lids and plastic storage tops.

Extra large jars add capacity but change heating and packing. Large pieces need liquid coverage and headspace, and oversized jars may not fit every canner.

Compare extra large canning jars before you buy a set.

Regular mouth or wide mouth for glass lid jars

Choose regular mouth when you want standard lids and smaller batches. Choose wide mouth when you pack by hand or ferment vegetables.

Measure the lid diameter before you buy replacement lids, and do not mix mouth sizes.

Rule: Buy regular mouth for spooned foods and wide mouth for hand packed foods, and match every lid to the mouth size.

How do glass clamp lids work and when do they suit canning?

Glass clamp lids seal by pressure from a clamp plus a rubber gasket. The gasket sits between the glass lid and the jar rim, and the clamp pulls the lid down evenly.

This design suits many European style preserving jars and some home canning uses when approved.

The gasket is the weak point in daily use. It can dry out, warp, absorb odors or lose its flat shape over time.

Check it before each use and replace it when it no longer sits flat.

Clamp lids need the correct jar size. A clamp that is too loose will not press evenly, and one that is too tight can stress the rim.

Use only the size made for that jar mouth.

Clamp lids also take more shelf space than a flat metal lid. The glass lid is heavier and can chip if it knocks against a shelf edge.

Rule: Use glass clamp lids only with the matching jar, gasket and clamp size.

What should you check on jar glass before you reuse or buy?

Check the rim, threads and body in bright light before you buy or reuse any jar. Glass strength depends on even thickness and freedom from damage, and small flaws can grow under heat.

Look for chips on the rim, cracks near the base, deep scratches and cloudy wear that hides damage. Run a fingertip lightly around the rim to feel for a rough edge, and turn the jar so light passes through the glass.

Discard any jar with a chip or crack.

Check the threads for wear and the base for uneven thickness. A jar that rocks on a flat surface or has a thick thin base may heat unevenly.

Home canning jars are made for heat processing, while ordinary storage jars may not be.

How to inspect a jar in 60 seconds

Hold the jar at eye level and check the rim first, then the threads, then the body and base. Look for chips, cracks, scratches and a dull base.

Wash the jar well before food use.

Rule: Reuse only jars with a smooth rim, sound threads and no cracks, and discard any jar with damage.

Are metal lids still better than glass lids for home canning?

Metal lids are often better for home canning because they are the standard approved closure. They are made for heat processing, seal with compound on the flat lid, and are held in place by the band during processing.

Metal lids also come in standard sizes and are easy to replace. The best canning lids and rings page compares sizes and styles, and many tested recipes assume metal lids and bands.

Glass clamp lids can suit canning when the jar maker approves them. They are reusable and avoid single use metal lids, but they need correct gaskets and clamps, cost more at the start and need more shelf space.

Plastic and silicone tops do not replace metal canning lids. They suit storage, refrigerator use and fermentation, but not most tested canning recipes.

Rule: Use standard metal lids for most home canning, and glass clamp lids only when approved.

When do plastic tops suit jar storage better than glass lids?

Plastic tops suit leakproof storage and refrigerator use better than many glass lids. They are light, they do not rust, and they can seal against liquids that would leak from a loose storage lid.

The Masontops Tough Tops are wide mouth plastic lids for Ball jars, and the jars are not included. The lid uses a precision engineered silicone gasket, has faceted sides for grip, and is made of BPA free plastic with no phthalates, according to Masontops.

Faceted sides help you open and close the lid, and the shape can help stop a jar from rolling on its side. Masontops says the plastic will not rust or warp and can go in the dishwasher or freezer.

The trade off is scope. This is a storage lid, not a canning lid for heat processing.

It fits wide mouth Ball jars, with part number TT4W, so it will not fit regular mouth jars.

Rule: Choose plastic tops for leakproof storage, and keep them out of canning recipes that call for metal lids.

When do silicone fermenting lids suit jars better than glass lids?

Silicone fermenting lids suit vegetable fermentation because they vent gas without opening the jar. They are a different tool from a canning lid, and they solve a problem that a sealed glass lid does not solve.

The Masontops Pickle Pipes are silicone airlock lids for wide mouth mason jars, and the jar is not included. Masontops says the one way waterless valve vents gas automatically, needs no water and needs no burping or maintenance during fermentation.

The low profile shape takes less shelf space than tall water airlocks. Masontops says the lids are BPA free, contain no phthalates and can go in the dishwasher.

The trade off is use case. These lids are for fermentation, not for canning or for long term sealed storage of canned food.

They fit wide mouth jars, so mouth size still matters.

Rule: Choose silicone venting lids for ferments, and do not use them as canning lids or sealed storage lids.

Which standard lids suit regular mouth jars for canning?

Standard metal lids suit regular mouth jars for most canning recipes. They are easy to find, they fit tested methods and they come in bulk counts for large batches.

The Ball Mason Jar Lids in this pack are regular mouth metal lids, with 72 lids in six packs of 12. Ball states that they fit regular mouth glass mason jars and suit jams, jellies, pickles, fruits, vegetables, sauces and juices when used by proper canning instructions.

The bulk count suits large batches and seasonal preserving.

The trade off is reuse. Flat metal canning lids are generally single use for canning, even though bands can be reused when sound.

If you want a reusable closure, compare glass clamp lids and check the maker method for each. For more detail, see best canning lids regular mouth.

Rule: Buy regular mouth metal lids for regular mouth canning, and buy bands and lids in the same mouth size.

How do you compare one piece lids, glass lids and two piece lids?

Compare closures by reuse, seal method and shelf space. One piece lids, glass clamp lids and two piece metal lids each solve a different problem.

One piece lids combine lid and sealing surface in a single part. They reduce parts to wash and store, and some suit canning when approved.

Read canning jars with one piece lids before you choose between systems.

Two piece metal lids use a flat lid plus a separate band. The flat lid seals, the band holds it during processing, and the system is widely stocked and assumed by many recipes.

Glass clamp lids use a glass lid, gasket and clamp. They are reusable when approved, but take more space and need gasket care.

How do you check glass lid compatibility with Ball jars?

Check compatibility by brand, mouth size and lid design. A lid that fits one jar may not fit another with the same nominal size.

Ball jars have specific mouth sizes and rim shapes. Some glass lids are made for Ball jars, and some for other brands with a slightly different rim.

Measure the outer mouth diameter and compare it with the lid maker size chart.

If you use Ball jars, read ball canning jars with glass lids for rim fit, gasket fit and clamp size checks.

Also confirm the approved use. A glass lid that fits the rim may still be a storage lid with no canning seal.

The maker statement on use matters as much as the fit.

How should you clean, store and care for glass lids and jars?

Care for glass lids by washing gently and checking gaskets often. Heat, detergents and stacking can wear gaskets, chip glass and dull metal clamps over time.

Wash glass jars and lids in warm soapy water and rinse well. Check the gasket for sticking, warping or odor before each use.

Replace a gasket that does not sit flat, smells strong or shows cracks.

Store clamps and lids where they will not knock against each other. Glass lids are heavy and can chip at the edge, so stack them with care or keep them in a divided box.

Keep metal bands dry to limit rust.

For reuse questions, read can you reuse canning jars before you put an old jar back into service. The guide explains inspection and limits that apply to jars and lids.

Rule: Wash glass lids gently, inspect gaskets before each use and store glass where it cannot chip.

What should you avoid when you buy canning jars with glass lids?

Avoid buying by looks alone. A clear glass lid can be a storage lid, a fermentation lid or a canning lid, and the wrong type can fail in heat or pressure.

Avoid mixing brands and mouth sizes. A lid that seems to fit may not seal evenly, and a clamp that is slightly off can stress the rim.

Measure the jar mouth and check the lid maker chart.

Avoid reusing damaged jars or worn gaskets. Chips, cracks and flat gaskets are common causes of seal failure.

Discard damaged glass and replace worn gaskets instead of hoping for a seal.

Avoid using plastic or silicone storage lids for canning. They can be excellent for storage and fermentation, but they are not a substitute for an approved canning closure.

Keep the method and the closure matched.

Rule: Buy only matched jar, lid and gasket sets with a stated use, and skip any lid whose approved use you cannot confirm.

Which glass lid jar setup should you choose for your kitchen?

Choose the setup by your main use, not by glass alone. Canning, fermenting, dry storage and refrigerator storage each call for a different closure.

For standard home canning, choose glass lids only when the jar maker approves a glass clamp system for that method. Otherwise choose standard metal lids and bands in the correct mouth size, since that path fits most tested recipes and keeps parts easy to find.

For fermenting vegetables, choose a silicone venting lid made for wide mouth jars. It vents gas without burping and keeps the ferment closed.

For leakproof refrigerator and pantry storage, choose a plastic lid with a gasket.

For dry goods and leftovers, glass jars with any sound storage lid can work well. Pick by mouth size, shelf space and how often you open the jar, with wide mouth for hand packed foods and regular mouth for spooned foods.

Rule: Pick canning with approved metal or glass clamp closures, fermenting with venting lids, and storage with leakproof lids.

Frequently asked questions

Are canning jars with glass lids safe for pressure canning?

Only use glass lids with clamps for pressure canning when the jar maker approves that exact jar and closure for pressure processing. Many glass lids are for storage, fermenting or water bath use, not pressure canning.

Check the maker instructions for the jar you own before you heat it under pressure.

Can you reuse canning jars with glass lids?

You can reuse sound glass jars for canning when the maker allows reuse and the glass has no chips, cracks or sharp wear. Inspect the rim, threads and body in good light before each use.

Discard any jar with damage, since damaged glass can fail during heating.

What is the difference between regular mouth and wide mouth jars?

Regular mouth jars have a narrower opening, while wide mouth jars give a wider opening for packing and cleaning. Regular mouth suits many jams and sauces, and wide mouth suits pickles, fermented vegetables and larger pieces.

Lids, bands and accessories must match the mouth size of the jar.

Do glass lids seal for long term food storage?

Some glass lids seal when paired with the correct gasket, clamp or ring and used by the maker method. Others are storage lids that keep dust out but do not create a canning seal.

Match the closure to the preservation method instead of assuming every glass lid seals the same way.