6 Best All American Pressure Canner Parts (November 2026)
The best All American pressure canner parts include the TZona 85772 Pressure Canner Gauge Replacement for Presto gauge replacement, the ANTOBLE Pressure Regulator Weight and Vent Pipe for All American control replacement, and the XVRTJ 09985 Pressure Canner Sealing Ring Fits for a Presto sealing-ring repair.
On this page (7 sections)
- Which All American pressure canner part should you replace?
- The best All American pressure canner parts compared
- How do you match All American pressure canner parts?
- Gauge, regulator weight or vent pipe: which part matters?
- How should you install and care for replacement parts?
- Are replacement parts better than replacing the whole canner?
- Verdict: which All American pressure canner part is best?
The best All American pressure canner parts depend on which component is worn and how your canner controls pressure. ANTOBLE is the strongest complete control repair for listed All American models, while CAMOLIKOS fits a regulator-only repair and the gauge picks require careful thread and model matching.
Pressure canner parts are not interchangeable just because they look similar. A gauge measures pressure, a regulator weight helps control pressure, a vent pipe supports that control system, and a sealing ring creates the pressure-tight seal around the lid.
We compared the stated model numbers, part numbers, pressure settings, connection types and included components. Our score weighs specs, features and buyer feedback against what you are shopping for.
That comparison matters because a part can look right and still use the wrong thread. It can also fit the lid yet release steam at a setting your canner does not call for.
This guide is for people planning a focused repair rather than a new appliance. It helps you match the worn part to the canner you already own.
You will see regulator weights, a vent pipe, gauges and a sealing ring covered in turn. Each one solves a different job, so starting with the failed component saves time.
For All American owners, the regulator and vent pipe choices deserve the closest look. They are the centre of automatic pressure control on the listed models.
For Presto owners, the gauge and sealing ring options are mainly about exact model and part number fit. They are not universal substitutes for All American parts.
Check the compatibility list before you order anything. Then confirm the pressure setting, connection and included hardware for your appliance.
If one part is sound, there is no need to replace it with the others. A targeted repair often keeps setup simpler and costs less than a full set.
Use the notes that follow to decide which component to inspect first. Keep your canner manual nearby while you compare the details.
Our picks at a glance
-
1
Best for Presto gauge replacementTZona 85772 Pressure Canner Gauge Replacement
9.6/10 our score
See it on Amazon -
2
Best for All American control replacementANTOBLE Pressure Regulator Weight and Vent Pipe
9.5/10 our score
See it on Amazon -
3
Best for a Presto sealing-ring repairXVRTJ 09985 Pressure Canner Sealing Ring Fits
9.4/10 our score
See it on Amazon
- 4
Check itsenctrl 20 Psi Pressure Cooker Canner Gauge
Best for 1/8 in NPT gauge mounting - 5
Check itCAMOLIKOS Pressure Regulator Weight Fits for All
Best for regulator-only replacement - 6
Check itsenctrl 20 Psi Pressure Cooker Gauge Replacement
Best for 3/8 in UNC gauge mounting
Which All American pressure canner part should you replace?
The right replacement is the one that matches the failed component, your canner model and the connection or pressure setting required by the appliance. Start by identifying whether the problem is the gauge, regulator system or lid seal.
If the gauge is difficult to read or its pointer is faulty, compare the gauge part number and thread style. If steam control is the concern, check whether you need only the regulator weight or both the regulator weight and vent pipe.
For a broader look at the appliance itself, read our guide to the pressure canner pot. It explains how the pot, lid, pressure controls and capacity work together.
A gauge problem usually shows up at the dial first. The face may fog, the pointer may stick or the reading may no longer match the pressure behaviour you expect during use.
In that case, write down the old gauge part number before you remove it. Also note whether the connection is 1/8 in NPT or 3/8 in UNC, since those threads are not interchangeable.
A regulator problem is more about steam release than reading. The weight may sit poorly, the settings may be hard to select or the jiggle and steam release may not follow the appliance instructions.
If the vent pipe itself is damaged or missing, replacing the weight alone will not complete the control system. The pipe attaches to the cover and the weight sits on top of it.
A lid seal problem looks different again. Steam may escape around the rim or the cover may not form the seal the manual describes, even when the gauge and regulator seem sound.
That points to the sealing ring or gasket area rather than the pressure controls. Match the exact ring part number and canner model before you buy a replacement.
Size matters too, but only as part of the full match. A canner capacity listed for a part is useful, yet you still need the right model, setting and connection.
Keep the old part until the new one is fitted and checked. That makes it easier to compare threads, washers and gaskets during setup.
Do not force a part that does not line up with the appliance. A loose or forced fit can leave the canner hard to use safely.
When in doubt, stop and follow the canner maker instructions for your exact model. The correct part is the one the appliance was designed to use.
The best All American pressure canner parts compared
ANTOBLE is the best match for replacing both automatic pressure-control components on several listed All American models. CAMOLIKOS is more focused because it includes the regulator weight only, while the gauge products are mainly useful when the connection and model match exactly.
1. TZona 85772 Pressure Canner Gauge Replacement: Best for Presto gauge replacement
TZona 85772 Pressure Canner Gauge Replacement: Best for Presto gauge replacement
- 0-20 PSI range
- Fits listed Presto models
- High-temperature alloy and PC plastic
- Extra gaskets
This gauge suits Presto pressure canner owners replacing part numbers 82237, 82121 or 85772. Its 0-20 PSI dial and extra gaskets support a direct gauge-focused repair.
Pros
- Broad listed Presto model compatibility
- 0-20 PSI dial
- Extra gaskets included
Cons
- Designed for listed Presto models, not All American models
- Compatibility still depends on the exact canner
TZona is a gauge replacement for the listed Presto pressure canner models and part numbers. It covers 82237, 82121 and 85772 replacements, along with models such as 01/CG22, 175001, 175005, 175006, 175107, 01781, 0178001 and other named Presto versions.
The gauge uses a 0-20 PSI measurement range, which gives you a pressure reading across the range stated for this part. Its transparent dial is designed for reading the current pressure, while the high-temperature alloy and PC plastic construction are intended for pressure-cooker use.
TZona includes extra gaskets, and the gauge has a brass chrome-plated connector. The listed package is a 1-count gauge with a 3/8 in UNC thread style, so check your old connection and canner model before removing the original part.
Installation involves removing the old gauge and washer, placing the silicone and stainless steel gaskets in the correct order for your appliance, and tightening the nut. The canner must not be in use during installation.
This is the best choice here for a Presto owner who needs the 85772 family of gauge replacements. It is not the first choice for an All American canner unless the exact model and connection match.
2. ANTOBLE Pressure Regulator Weight and Vent Pipe: Best for All American control replacement
ANTOBLE Pressure Regulator Weight and Vent Pipe: Best for All American control replacement
- Regulator weight and vent pipe
- 18-pound pressure release
- Fits listed All American models
- Automatic pressure control
This is the most direct choice when both the vent pipe and regulator weight need replacement on a listed All American canner. The two parts work together to release steam and maintain automatic pressure control.
Pros
- Covers several All American models
- Includes the vent pipe and weight
- No regulator adjustment or accuracy testing required
Cons
- Releases at 18 lb
- Model fit must be checked before ordering
ANTOBLE is the clearest fit when both the regulator weight and vent pipe need replacement on a listed All American pressure cooker or canner. It is designed for models 910, 915, 921, 925, 930 and 941, covering stated capacities from 10.5 qt to 41.5 qt.
The regulator weight and vent pipe form the automatic pressure-control system. The vent pipe attaches to the cover, and the weight sits on top of it.
ANTOBLE states that this setup releases excess steam at 18 lb of pressure.
During use, the pressure canner weight is expected to jiggle audibly and release steam when the proper temperature is reached. The weight itself does not require adjustment or accuracy testing according to the product information.
Choose this set when replacing only the regulator weight would leave an old or damaged vent pipe in place. If your vent pipe is sound and the weight is the only missing or worn part, a regulator-only option may be a closer match.
Check the model number before installation, then follow the appliance instructions for heating, pressure control and cooling. Never remove the regulator or open the lid until the canner has cooled and fully depressurized.
3. XVRTJ 09985 Pressure Canner Sealing Ring Fits: Best for a Presto sealing-ring repair
XVRTJ 09985 Pressure Canner Sealing Ring Fits: Best for a Presto sealing-ring repair
- 09985 replacement part
- Food-grade silicone
- Fits listed Presto models
- Forms a pressure-tight seal
This sealing ring is for a pressure canner cover that needs a new rim seal rather than a gauge or regulator. Its 09985 part number and listed Presto model fit are the key checks.
Pros
- Food-grade silicone
- Heat-resistant and tear-resistant material
- Fits several listed Presto models
Cons
- Not an All American part
- Model and part number must match
XVRTJ is for a different repair job from the gauges and regulator weights. Its 09985 food-grade silicone sealing ring fits around the inside rim of the cover and forms the pressure-tight seal between the cover and canner body.
The stated compatible Presto models include 0174510 at 16 qt, 0175107 at 18 qt, 0175510 at 16 qt, and 0178107, 0178209 and 0178410 at 23 qt. These model numbers matter more than the ring's general shape.
A sealing ring is the right component to inspect when steam escapes around the lid rim or the cover does not form the seal expected by the appliance instructions. It does not replace a pressure gauge, regulator weight or vent pipe.
The food-grade silicone is described as non-toxic, heat-resistant and tear-resistant. Keep the ring clean and inspect it before use, but follow the canner's instructions for cleaning, storage and replacement intervals.
This is the best pick for the listed Presto models when the sealing ring is the problem. It is not an All American replacement based on the compatibility information here.
Read our guide to a replacement gasket for pressure canner before choosing between a sealing ring and another lid component.
4. senctrl 20 Psi Pressure Cooker Canner Gauge: Best for 1/8 in NPT gauge mounting
senctrl 20 Psi Pressure Cooker Canner Gauge: Best for 1/8 in NPT gauge mounting
- 0-20 PSI scale
- 304 stainless steel case
- IP67 waterproof design
- 1/8 in NPT male connection
This gauge fits buyers who need a 1/8 in NPT male connection and a single 0-20 PSI scale. It is compatible with the listed models and can replace steam gauge part number 85729.
Pros
- 304 stainless steel case
- IP67 waterproof design
- Silicone adapter and nut included
Cons
- 1/8 in NPT connection is not universal
- Listed compatibility is model-specific
The senctrl PCGK02.20# gauge suits a canner that requires a 1/8 in NPT male connection. It uses a 2 in dial with a single 0-20 PSI scale, so the connection and pressure range are the first details to verify.
The case is made from 304 stainless steel and has an IP67 waterproof design. That construction is intended to resist corrosion and reduce condensation or moisture-related fogging inside the window.
This gauge can replace steam gauge part number 85729. It is also listed for pressure canner models 0175002, 0175003, 0175004 and 0178002, 0178003 and 0178004H.
A silicone adapter and nut are included for installation. Because the connection is 1/8 in NPT, do not substitute it for the senctrl version with a 3/8 in UNC connection without confirming that the appliance accepts the thread.
Choose this gauge when your repair requires the NPT connection and the listed model compatibility. It is a focused gauge replacement, not a complete pressure-control set.
For more detail on gauge selection, see our guide to a pressure canner gauge. If you need to check an existing gauge, our guide to a pressure canner gauge tester covers the next step.
5. CAMOLIKOS Pressure Regulator Weight Fits for All: Best for regulator-only replacement
CAMOLIKOS Pressure Regulator Weight Fits for All: Best for regulator-only replacement
- Fits listed All American and Mirro sizes
- 5, 10 and 15 PSI settings
- Clearly marked settings
- Regulator weight only
This choice suits a compatible All American or Mirro canner when the regulator weight is the only part that needs replacing. Its marked 5, 10 and 15 PSI settings make the selection visible during setup.
Pros
- Several pressure settings
- Fits listed canner sizes
- Regulator-only repair avoids replacing the whole appliance
Cons
- Vent pipe is not included
- Exact appliance compatibility must be confirmed
CAMOLIKOS is the focused option for a compatible All American or Mirro canner that needs a new pressure regulator weight only. It is listed for 10.5, 15.5, 21.5, 25, 30 and 41.5 qt pressure cookers and canners.
The regulator has clearly marked 5, 10 and 15 PSI settings. Those markings let you select the pressure opening that matches your appliance instructions, but they do not remove the need to confirm the canner model and required setting.
The weight helps maintain selected pressure by allowing steam to escape through the vent during operation. Place the selected pressure opening over the compatible canner's vent pipe, make sure it sits properly, and follow the appliance instructions for heat and pressure control.
Only the pressure regulator weight is included. The vent pipe is not included, so this product makes more sense when the existing vent pipe is in good condition and the weight is the part that needs replacement.
Let the canner cool naturally and fully depressurize before removing the regulator or opening the lid. Choose CAMOLIKOS over the ANTOBLE set when you need a regulator-only repair and your model matches the listed sizes.
Read our guide to pressure canner weights for help comparing settings and fit.
6. senctrl 20 Psi Pressure Cooker Gauge Replacement: Best for 3/8 in UNC gauge mounting
senctrl 20 Psi Pressure Cooker Gauge Replacement: Best for 3/8 in UNC gauge mounting
- 0-20 PSI scale
- 304 stainless steel case
- IP67 waterproof design
- 3/8 in UNC male connection
This gauge is the better senctrl match when your canner uses a 3/8 in UNC connection. It replaces the listed 82121, 82237 and 85772 part numbers on compatible models.
Pros
- 3/8 in UNC connection
- Gasket, washer and nut included
- 304 stainless steel case
Cons
- Not interchangeable with 1/8 in NPT versions
- Fit depends on the canner model and connection
This senctrl gauge is the better choice for a canner that uses a 3/8 in UNC male connection. It has a 2 in dial, a single 0-20 PSI scale and a 304 stainless steel case.
The gauge can replace steam gauge part numbers 82121, 82237 and 85772. Its listed compatible models include 01/CG22, 0175001, 0175005, 0175006, 0175107, 0175510, 0178001, 0178005, 0178006, 0178107 and 0178410.
A gasket, metal washer and nut are included. The lower-mount connection makes the thread style especially important, since this gauge is not the same connection as the senctrl 1/8 in NPT model.
The IP67 waterproof design is intended to reduce condensation inside the gauge window. A clear 0-20 PSI scale helps you read the pressure, but the gauge still needs to be installed only on a canner it is designed to fit.
Choose this version when the old gauge uses the 3/8 in UNC connection or one of the listed replacement part numbers. If your canner needs 1/8 in NPT, compare the other senctrl option instead.
How do you match All American pressure canner parts?
Match the brand, model number, part number, thread style and pressure setting before buying. A replacement that fits the lid opening physically may still have the wrong connection or pressure range for the canner.
Write down the model number from the appliance, then compare it with the compatibility list for the part. For gauges, check whether the connection is 1/8 in NPT or 3/8 in UNC, and compare any old part number printed on the gauge.
For regulator weights, check both the canner size and the required PSI setting. ANTOBLE is listed for an 18 lb release and includes the vent pipe, while CAMOLIKOS is listed with 5, 10 and 15 PSI settings and includes the weight only.
For sealing rings, match the exact ring part number and canner model. A ring for a listed Presto model should not be treated as a universal All American gasket.
Gauge, regulator weight or vent pipe: which part matters?
A pressure gauge shows the pressure reading, while a regulator weight helps control pressure by allowing steam to escape at the selected or stated setting. The vent pipe supports the regulator and attaches to the canner cover.
Replace the gauge when the dial, pointer or connection is the problem. Replace the regulator weight when its settings or fit are the issue, and replace the vent pipe when the support connection or pipe itself needs repair.
If both regulator components need replacement, ANTOBLE saves you from combining separate parts. If only the weight needs replacement and the vent pipe is usable, CAMOLIKOS is more targeted.
Do not confuse a sealing ring with a pressure-control part. The ring creates the lid seal, so it solves a different problem from inaccurate pressure readings or a damaged regulator.
How should you install and care for replacement parts?
Install replacement parts only while the canner is not in use, and follow the appliance instructions for the exact order of washers, gaskets and nuts. Tighten gauge connections securely without forcing a thread that does not match.
For a gauge, remove the old component carefully and check the gasket or washer arrangement before fitting the replacement. The TZona instructions mention using silicone and stainless steel gaskets, while the senctrl models include different connection hardware.
Keep the regulator opening and vent path clear according to the canner's instructions. During operation, watch for the pressure behavior expected by the appliance, and never remove a regulator or open the lid while pressure remains.
After use, allow the canner to cool and fully depressurize before opening it. Inspect the lid seal, gauge face, regulator and vent pipe as part of regular preparation, especially before a long canning session.
If you use a water bath canner on a glass cooktop, see our guide to a water bath canner for glass top stove. It covers a different canning method and different stovetop fit concerns.
Are replacement parts better than replacing the whole canner?
A matched replacement part can solve a focused repair without replacing the entire canner. The benefit depends on knowing which component is worn and confirming that the replacement matches the appliance.
A gauge replacement makes sense when the canner body, lid and pressure-control system remain suitable. A regulator weight or vent pipe replacement is similarly focused, while a sealing ring is a routine type of lid-seal repair for compatible models.
Do not use a replacement part to bypass a larger safety problem. If the lid, cover, body or pressure-control system has damage beyond the named part, stop and follow the appliance maker's service guidance.
Our roundup of best pressure canner replacement parts compares more component types. For a complete appliance rather than a repair, see our guide to the best pressure canner on sale.
Verdict: which All American pressure canner part is best?
Choose the ANTOBLE regulator weight and vent pipe when a listed All American model needs both automatic pressure-control components. Choose CAMOLIKOS when the vent pipe is sound and you need a regulator weight with 5, 10 and 15 PSI settings.
Pick one of the senctrl gauges only after confirming the connection. The 1/8 in NPT version and 3/8 in UNC version are different parts, while TZona is aimed at the listed Presto gauge models and replacement numbers.
For a lid seal, choose the XVRTJ 09985 ring only when your Presto model and part number match. The best All American pressure canner parts are the ones that match the exact repair, not simply the ones with the most similar shape.
Our top 3 picks at a glance
-
1
Best for Presto gauge replacement
TZona 85772 Pressure Canner Gauge Replacement
9.6/10 our score
See it on Amazon -
2
Best for All American control replacement
ANTOBLE Pressure Regulator Weight and Vent Pipe
9.5/10 our score
See it on Amazon -
3
Best for a Presto sealing-ring repair
XVRTJ 09985 Pressure Canner Sealing Ring Fits
9.4/10 our score
See it on Amazon
Frequently asked questions
What are the most important All American pressure canner parts?
The main parts are the pressure gauge, regulator weight, vent pipe and sealing components. A gauge shows pressure, while a regulator weight and vent pipe manage automatic pressure control.
Match each replacement to your exact All American model, pressure setting and part number before installation.
Do All American pressure canners use a gauge?
Some All American pressure canner setups use a pressure gauge, while the regulator weight and vent pipe provide automatic pressure control. If you replace a gauge, confirm the connection and model compatibility.
A gauge with the wrong thread or part number is not a safe substitute.
What pressure regulator weight fits an All American canner?
The ANTOBLE regulator weight and vent pipe are listed for All American models 910, 915, 921, 925, 930 and 941, with an 18-pound pressure release. CAMOLIKOS is listed for 10.5, 15.5, 21.5, 25, 30 and 41.5 qt sizes with 5, 10 and 15 PSI settings.
Can I use a Presto pressure gauge on an All American canner?
Do not assume a Presto gauge fits an All American canner. The TZona and senctrl gauges here name specific Presto models or connection types.
Compare the canner model, thread style, replacement part number and pressure range before choosing a gauge.
