6 Best Pressure Canner Replacement Parts (November 2026)
The best pressure canner replacement parts include the ANTOBLE 85772 Pressure Canner Gauge Replacement Parts for compatible Presto gauges, the ANTOBLE Pressure Regulator Weight and Vent Pipe for All American regulator repairs, and the XVRTJ 09985 Pressure Canner Sealing Ring Fits for listed Presto sealing rings.
On this page (5 sections)
The best pressure canner replacement parts are the ones that match your exact model, part number and connection. A gauge that fits one lid may not fit another, and a sealing ring made for one rim may not seal a different model.
This comparison leads with ANTOBLE options for two common repair jobs, the 85772 gauge for listed Presto canners and the regulator and vent pipe set for listed All American canners. The XVRTJ sealing ring and the senctrl gauges then cover narrower needs, where the part number, ring size or thread type decides the fit.
Start by finding the number stamped on your old part or printed in your canner manual. Then compare that number with the model list for each replacement before you look at price or features.
A gauge is the part you read while pressure builds, so its scale and connection need to suit your canner. A regulator weight controls how steam escapes, a vent pipe supports that weight, and a sealing ring forms the pressure-tight seal between lid and body.
Each job is different, and replacing one part does not fix a worn part in another role on the same canner. That is why this guide treats gauges, weights, vent pipes and rings as separate choices.
If you are still choosing the appliance itself, start with our guide to the pressure canner pot.
If the problem is a worn lid seal rather than a gauge or regulator, see our guide to a replacement gasket for pressure canner.
Keep your old part number handy while you read through the picks below. That one check will save more time than comparing every feature on the page.
Our picks at a glance
-
1
Best for compatible Presto gaugesANTOBLE 85772 Pressure Canner Gauge Replacement Parts
9.5/10 our score
See it on Amazon -
2
Best for All American regulator repairsANTOBLE Pressure Regulator Weight and Vent Pipe
9.5/10 our score
See it on Amazon -
3
Best for listed Presto sealing ringsXVRTJ 09985 Pressure Canner Sealing Ring Fits
9.4/10 our score
See it on Amazon
- 4
Check itsenctrl 20 Psi Pressure Cooker Canner Gauge
Best for 1/8 in NPT installations - 5
Check itCAMOLIKOS Pressure Regulator Weight Fits for All
Best for multi-setting regulator control - 6
Check itsenctrl 20 Psi Pressure Cooker Gauge Replacement
Best for 3/8 in UNC replacements
How we chose the best pressure canner replacement parts
We compared stated model fit, part numbers, pressure settings, thread sizes and included components for each part. Those details show real fit better than a general brand claim.
We also looked at how clearly each part solves a common repair without requiring a whole new canner. A sound body may only need a gauge, a ring or a regulator weight.
Our score weighs specs, features and buyer feedback against what you are shopping for. It is a starting order for reading, not proof that every part fits every canner.
First identify the part you need, since each has a different job. A gauge shows pressure, a regulator weight helps control steam release, a vent pipe supports the regulator, and a sealing ring forms the lid seal.
Once you know which job has failed, narrow the list to parts that do that job and match your connection or rim. That avoids buying a gauge when the ring is worn, or a weight when the vent pipe is the problem.
Included hardware mattered too, since a part without the right washer, nut or adapter can stall a repair. Some options include a silicone adapter, a gasket, a metal washer or a nut, while others include the part alone.
We also checked pressure settings and scales, because a 0 to 20 PSI gauge and a fixed-level regulator do different work. The right setting depends on your canner instructions and the recipe, not on habit.
Materials were part of the comparison as well, from iron and glass to stainless steel and food-grade silicone. Each material is chosen for heat and handling in this use.
We treated fit lists as exact lists, not broad brand promises. If your model number is not named, confirm fit before ordering rather than assuming a close match will work.
For All American models, compare this group with our guide to best All American pressure canner parts. That guide helps when a repair involves more than one All American component.
For gauge decisions, our pressure canner gauge guide covers threads, dials and mounting hardware in more detail. Read it alongside this comparison if that is your main question.
Set-up and care also shaped our ranking, since a part that seats well and is easy to inspect suits regular home use.
| Product | Best for | Range | Model | Count | Our score |
|---|---|---|---|---|---|
| ANTOBLE 85772 Pressure Canner Gauge Replacement Parts | compatible Presto gauges | 0–20 PSI | 85772 | 1 steam gauge | 9.5 |
| ANTOBLE Pressure Regulator Weight and Vent Pipe | All American regulator repairs | 9.5 | |||
| XVRTJ 09985 Pressure Canner Sealing Ring Fits | listed Presto sealing rings | 9.4 | |||
| senctrl 20 Psi Pressure Cooker Canner Gauge | 1/8 in NPT installations | 1 pressure gauge | 9.3 | ||
| CAMOLIKOS Pressure Regulator Weight Fits for All | multi-setting regulator control | 9.2 | |||
| senctrl 20 Psi Pressure Cooker Gauge Replacement | 3/8 in UNC replacements | 1 pressure gauge | 9.1 |
The best pressure canner replacement parts by use
These picks are ordered by score, but the right choice still depends on compatibility. Start with the brand and model, then confirm the part number or thread before you order.
ANTOBLE 85772 Pressure Canner Gauge Replacement Parts: Best for compatible Presto gauges
- Replaces parts 85772, 82237 and 82121
- 0–20 PSI range
- Fits listed Presto models
- Iron and glass
This gauge is the best match for listed Presto pressure canner models that use part numbers 85772, 82237 or 82121.
Pros
- Wide listed Presto compatibility
- 0–20 PSI scale
- Includes 1 steam gauge
Cons
- Only fits the listed models and part numbers
- Gauge replacement does not replace other lid parts
ANTOBLE's 85772 gauge is the strongest choice here for the listed Presto models and replacement numbers. It replaces parts 85772, 82237 and 82121, with a 0 to 20 PSI range for reading pressure during canning and cooking.
The listed fit covers Presto models including 01/CG22, 175001, 175005, 175006, 175107, 01755, 0175510, 178001, 178005, 178006, 178107 and 178410. That is a wide list, but it still does not make this a universal gauge for every Presto canner.
Check your model number carefully against that list before you order. If your number is not named, treat the fit as unconfirmed and look for a part that names your model.
The gauge uses iron and glass, measures 1.97 x 1.02 x 2.87 in and weighs 2.72 oz, so it is a compact lid part rather than a bulky add-on. Those dimensions simply help you picture how it sits on the cover during use.
Installation uses a hexagonal silicone rubber washer and stainless steel nut, and the canner must not be in use during installation. Let the canner cool and fully depressurize first, then follow your appliance instructions for seating and tightening.
Choose it when your Presto canner matches one of the listed models or part numbers and you need a 0 to 20 PSI reading. If you need help comparing pressure readings and gauge types, read our guide to a pressure canner gauge.
ANTOBLE Pressure Regulator Weight and Vent Pipe: Best for All American regulator repairs
- Regulator weight and vent pipe
- Releases excess steam at 18 PSI
- Fits listed All American models
- For 10.5–41.5 qt models
This paired regulator and vent pipe helps replace the automatic pressure-control parts on listed All American canners.
Pros
- Includes both regulator and vent pipe
- Fits several listed All American sizes
- No full canner replacement needed
Cons
- Compatibility is limited to listed models
- 18 lb control is not the same as a multi-setting weight
ANTOBLE's regulator weight and vent pipe are the best paired replacement for listed All American pressure cookers and canners. The set is designed to release excess steam at 18 lb of pressure, which is a fixed level rather than a set of choices.
Compatibility covers All American models 910, 915, 921, 925, 930 and 941, representing listed sizes from 10.5 qt to 41.5 qt. Confirm the model before ordering because the set is built around those specific canner families.
That range suits households that can in larger batches, since the larger models in the list are made for bigger loads. It also means the model number, not the quart size alone, is the check that counts.
The vent pipe attaches to the cover, and the regulator weight sits on top of it to form the automatic pressure control. When the canner reaches the proper pressure, the weight can jiggle audibly while steam is released.
In daily use, that jiggle is a cue to adjust heat according to your canner instructions rather than a sign to handle the parts. Let the canner cool naturally and fully depressurize before you remove the weight or open the lid.
Choose this set when both the regulator and vent pipe need replacement and your model is listed. If only the weight needs changing and you want several pressure settings, compare it with the CAMOLIKOS option below and our guide to pressure canner weights.
XVRTJ 09985 Pressure Canner Sealing Ring Fits: Best for listed Presto sealing rings
- Replacement part 09985
- Food-grade silicone
- Fits listed Presto models
- Forms a pressure-tight lid seal
Choose this sealing ring when your Presto model matches the listed 09985-compatible canners and the lid seal needs replacement.
Pros
- Food-grade silicone material
- Clear model list
- Designed for the lid rim
Cons
- Does not fit every Presto canner
- Ring alone does not replace a damaged lid or gauge
The XVRTJ 09985 is the best fit here for listed Presto canners that need a replacement sealing ring. Its food-grade silicone ring fits around the inside rim of the cover to form a pressure-tight seal between the lid and body.
The stated compatibility includes Presto models 0174510, 0175107, 0175510, 0178107, 0178209 and 0178410. Those models cover listed 16, 18 and 23 qt canners, but the size alone should not replace a model-number check.
A sealing ring is a fit-sensitive part, so compare the old part number and canner model first. Then inspect the ring's seating area and the lid rim before installation, and follow your canner instructions for how the ring should sit.
In regular use, a ring is a maintenance part you check as part of your set-up routine. Clean it as directed, seat it evenly, and do not use the canner if the seal does not form as the instructions describe.
Choose it for a matching Presto 09985 replacement on a listed model. Do not use it as a substitute for a gauge or regulator, since it solves the lid-seal part of the system only.
senctrl 20 Psi Pressure Cooker Canner Gauge: Best for 1/8 in NPT installations
- 0–20 PSI single scale
- 304 stainless steel case
- 1/8 in NPT male thread
- Silicone adapter and nut
This is the right direction for a listed pressure cooker or canner that uses a 1/8 in NPT connection and compatible part number 85729.
Pros
- Stainless steel case
- Waterproof IP67 design
- Includes silicone adapter and nut
Cons
- Thread must match your canner
- Listed compatibility is narrower than a universal gauge
The senctrl 20 PSI gauge with a 1/8 in NPT male thread is the best option here when that connection matches your pressure cooker or canner. It has a 2 in lower-mount dial, a 304 stainless steel case and a single 0 to 20 PSI scale.
The gauge can replace steam gauge part number 85729 and is listed for models 0175002, 0175003, 0175004, 0178002, 0178003 and 0178004H. The thread is the key buying check because this gauge is not the same connection as the 3/8 in UNC senctrl model.
A silicone adapter and nut are included for installation, which helps the gauge seat on a matching lower mount. Follow your appliance instructions for fitting, and make sure the canner is cool and not pressurized before you work on the lid.
The IP67 waterproof design is intended to reduce condensation inside the window, which can help keep the scale readable. That matters during long batches, when a fogged window makes pressure hard to read at a glance.
Choose it when your old gauge uses the listed model or part number and a 1/8 in NPT connection. Measure or confirm the connection before ordering, since thread size cannot be guessed from the dial alone.
CAMOLIKOS Pressure Regulator Weight Fits for All: Best for multi-setting regulator control
- 5, 10 and 15 PSI settings
- Fits listed 10.5–41.5 qt canners
- Regulator weight only
- Automatic pressure control
This weight suits compatible All American and Mirro canners when you want 5, 10 and 15 PSI settings and already have the correct vent pipe.
Pros
- Three marked pressure settings
- Fits several listed canner sizes
- Can replace the weight without replacing the canner
Cons
- Vent pipe is not included
- Model fit still needs checking
CAMOLIKOS is the best choice for compatible canners that need a regulator weight with 5, 10 and 15 PSI settings. It fits listed 10.5, 15.5, 21.5, 25, 30 and 41.5 qt pressure cookers and canners.
The weight helps maintain the selected pressure by allowing steam to escape through the vent during operation. Place the selected opening over the compatible canner's vent pipe, then follow the appliance instructions for heat control and depressurization.
Those three settings suit home users who follow recipes that call for different pressures in the same kitchen. Set the weight before you start, and adjust heat during cooking as your canner instructions direct.
This is the regulator weight only, and the vent pipe is not included. Check that your existing pipe is compatible and in usable condition before choosing this part, since the weight needs the right pipe to sit and work correctly.
Let the canner cool naturally and fully depressurize before you remove the regulator or open the lid. That care step is part of normal set-up and helps you inspect the weight and pipe for the next use.
Choose it when adjustable settings matter and your canner matches the listed sizes. For a complete regulator and vent-pipe set, the ANTOBLE option is the more complete match.
senctrl 20 Psi Pressure Cooker Gauge Replacement: Best for 3/8 in UNC replacements
- 0–20 PSI single scale
- 304 stainless steel case
- 3/8 in UNC male thread
- Gasket, metal washer and nut
This gauge is made for listed canners that replace part numbers 82121, 82237 or 85772 and use a 3/8 in UNC connection.
Pros
- Stainless steel case
- Waterproof IP67 design
- Mounting hardware included
Cons
- 3/8 in UNC thread must match
- Not the same connection as the 1/8 in NPT model
The senctrl 20 PSI gauge with a 3/8 in UNC male thread is the best fit for listed canners that replace parts 82121, 82237 or 85772. It uses a 2 in lower-mount dial, a 304 stainless steel case and a single 0 to 20 PSI scale.
The listed model fit includes 01/CG22, 0175001, 0175005, 0175006, 0175107, 0175510, 0178001, 0178005, 0178006, 0178107 and 0178410. Compare those numbers with your canner before ordering, since the part numbers and the model list both need to line up.
A gasket, metal washer and nut are included for installation, so the gauge arrives with the mounting pieces listed for this connection. Follow your appliance instructions for fitting, and work only on a cool, fully depressurized canner.
The IP67 waterproof design is intended to reduce condensation and help keep the gauge window clear. A clear window matters when you need a quick reading during a batch, because a fogged dial slows you down and invites mistakes.
Choose this gauge when your canner uses the listed 3/8 in UNC connection. It is not interchangeable with the senctrl gauge using a 1/8 in NPT male thread, so confirm the thread before you order.
What should you check before buying pressure canner parts?
Check the canner brand, model number, replacement part number and connection type before choosing any part. Those four details narrow the field faster than any feature list.
For a gauge, confirm the thread and mounting style, since a lower-mount dial with one thread will not fit a lid made for another. Note whether your old gauge used a silicone adapter, a gasket, a washer or a nut, because the replacement should include what your connection needs.
For a sealing ring, confirm the part number and model list, and check the lid rim where the ring seats. A ring close in size but made for another model may not form the seal your canner needs.
For a regulator, check whether you need the weight only or both the weight and vent pipe. The CAMOLIKOS weight includes no vent pipe, while the ANTOBLE All American set includes both components.
Also check the pressure range or settings, because gauges and regulators do different jobs. The gauges here use a 0 to 20 PSI scale, while the regulators use either 18 lb control or marked 5, 10 and 15 PSI settings.
Match the setting to your canner instructions and recipe, not to a general preference for higher or lower pressure. A fixed 18 lb control and a multi-setting weight suit different routines, even on similar canners.
Look at included components before you order, since a part that arrives alone may need hardware you already have. If your vent pipe, washer or nut is damaged, a set that includes that piece can be the simpler repair.
Do not open or remove pressure-control parts while the canner is hot or pressurized. Let it cool naturally and fully depressurize, then follow the appliance instructions.
Which replacement part fits Presto pressure canners?
The ANTOBLE 85772 gauge and senctrl 3/8 in UNC gauge both cover listed Presto-related part numbers, but their model lists and mounting parts differ. One uses a hexagonal silicone rubber washer and stainless steel nut, while the other includes a gasket, metal washer and nut.
The XVRTJ 09985 is a sealing ring for a separate group of listed Presto models, so it is a different repair job. A canner can need a ring and a gauge at the same time, but the parts are not interchangeable.
Use the exact model number as the deciding check, since the brand name alone does not tell you which lid or connection you have. Find the number on your canner or in its manual, then compare it with each list before you order.
A canner that uses a 09985 ring may still need a different gauge or regulator, because these parts solve different problems. The ring seals the lid, the gauge reads pressure, and the regulator helps control steam release.
That separation also helps with care, because a ring needs careful seating, a gauge needs a clear dial, and a regulator needs a clean seat on its vent pipe.
Thread size is another deciding detail, since senctrl offers both a 1/8 in NPT model and a 3/8 in UNC model. Confirm the connection on your lid rather than choosing by dial size alone.
If your old gauge is missing or damaged, the part number on the remaining piece or in the manual is your best clue. Write it down before you shop and keep it beside the model number while you compare lists.
Check capacity too, since some listed models here cover 16, 18 and 23 qt canners. Capacity can narrow a list, but it should never replace the model check.
If your canner uses quart jars, our guide to a pressure canner for quart jars can help with size and capacity questions.
For another equipment comparison, see our guide to the best pressure canner on sale. Use it when you are weighing a new appliance against repairing the one you own.
What is the final pick among these pressure canner parts?
Choose ANTOBLE's 85772 gauge for the broadest listed Presto gauge fit, or choose the ANTOBLE regulator and vent pipe when both automatic pressure-control parts need replacement on a listed All American model.
Pick the XVRTJ ring for a matching Presto 09985 lid seal, since the ring is made for a specific list of models and rims. It is the right part when sealing is the problem, and it is not a gauge or regulator substitute.
Choose CAMOLIKOS for compatible 5, 10 and 15 PSI regulator settings, especially when you follow recipes that call for different pressures. Remember that this is the weight only, so your existing vent pipe needs to be compatible and in good condition.
Choose a senctrl gauge only after confirming whether your canner uses 1/8 in NPT or 3/8 in UNC, because the two gauges are built for different connections. The dial and scale look similar, but the thread decides whether the gauge can be installed.
For Presto owners, the model list is the safest guide, since the ANTOBLE gauge and the senctrl 3/8 in UNC gauge name similar part numbers with different mounting hardware. Compare your number with both lists and choose the one that matches your lid.
For All American owners, the choice comes down to whether you need a weight alone or a weight with a vent pipe. A paired set can be simpler when both pieces are worn, while a weight alone suits a canner whose pipe is still sound.
In every case, let the canner cool naturally and fully depressurize before you remove or fit a part. That step protects you and gives you a clean moment to check the seat, the threads and the hardware.
For more All American part choices, continue with best All American pressure canner parts.
Our top 3 picks at a glance
-
1
Best for compatible Presto gaugesANTOBLE 85772 Pressure Canner Gauge Replacement Parts
9.5/10 our score
See it on Amazon -
2
Best for All American regulator repairsANTOBLE Pressure Regulator Weight and Vent Pipe
9.5/10 our score
See it on Amazon -
3
Best for listed Presto sealing ringsXVRTJ 09985 Pressure Canner Sealing Ring Fits
9.4/10 our score
See it on Amazon
Frequently asked questions
How do I choose pressure canner replacement parts?
Match the replacement part number, canner brand, model and connection size before ordering. A gauge may use a 1/8 in NPT or 3/8 in UNC thread, while a sealing ring depends on the lid and canner model.
If any one of those details differs, choose a different part or confirm the fit first.
What is the most important pressure canner part to match?
The most important match is the part that controls sealing or pressure measurement. Check the canner model, replacement part number and thread or lid dimensions.
A gauge with the wrong connection cannot be installed correctly, and a sealing ring made for another model may not form the needed pressure-tight seal.
Are pressure canner gauges interchangeable?
No. Pressure canner gauges can use different part numbers, threads and mounting hardware.
The senctrl options here use different connections: one has a 1/8 in NPT male thread and the other has a 3/8 in UNC male thread.
Match the connection and listed model before replacing a gauge.
Should I replace a pressure canner sealing ring?
Replace a sealing ring when it no longer makes the pressure-tight seal required by your canner instructions, but first confirm the correct part number and model. The XVRTJ 09985 ring fits only the listed Presto models, so do not assume one ring fits every Presto canner.
About this guide: Our look at pressure canner replacement parts draws on maker specs, materials and what owners report. See how we research.



